The Antennas listed below are extremely rugged and are fabricated of light weight, high strength aluminum alloys. All the antennas listed are designed to survive 100 mph winds.
The Model 5050ANT Omni Directional Antenna is standard equipment in the HydroLynx packaged gauges except for the Model 50386P Packaged Repeater which requires a high gain antenna. High gain omni antennas are recommended for the central site and repeater receive antennas. Directional antennas may be used as receive antennas in some situations. However, the horizontal band width must be considered during radio path studies to ensure consistent reception.
The DB224, DB408 and DB420 Antennas are supplied with clamps for top mounting. If top mounting is not feasible, heavy duty side mount kits are available that include all brackets, clamps and hardware to mount the antenna to a tower leg.
Model | Type | Gain | Length | Width | Horiz. Beam Width | Mounting Brackets | Connector |
5050ANT | Omni (VHF or UHF) | 0 dB | 2 ft. | 3 ft. | 360 Degrees | U-Bolt to 1 5/8 in. | UHF(F) |
5050A | Omni (VHF or UHF) | 3 dB | 2 ft. | 3 ft. | 360 Degrees | U-Bolt to 1 5/8 in. | UHF(F) |
5050MBX-150 | VHF-OMNI | 3 dB | 9.2 ft. | 7.2 in. | 360 Degrees | Mounting clamps | UHF(F) |
DB224 | VHF-OMNI | 6 dB | 20 ft. | 1.5 ft. | 360 Degrees | Bracket for 2 ½ in. top* | N(M) |
DB230 | VHF-DIR | 7 dB | 3.5 ft. | 3 ft. | 76 Degrees | Bracket for 2 in. pipe | N(M) |
DB408 | UHF-OMNI | 6.6 dB | 9.5 ft. | 1.5 ft. | 360 Degrees | Bracket for 2 ½ in. top* | N(M) |
DB420 | UHF-OMNI | 9.5 dB | 18 ft. | 1.5 ft. | 360 Degrees | Bracket for 2 ½ in. top* | N(M) |
DB436 | UHF-DIR | 10 dB | 3 ft. | 2 ft. | 40 Degrees | Bracket for up to 3 in. pipe | N(M) |
SAM-160 | VHF-DIR | 10 dB | 4.5 ft. | 2.5 ft. | 60 Degrees | Bracket for 1 ¼ in. mast | N(F) |
Note that lengths and widths are approximate.
* Indicates side mounting available.
N/A
Click here for specifications.
DB5001
Side Mount Kit for DB224
DB5012
Side Mount Kit for DB408 and DB420
DB365W
Wall or Wooden Pole Mounting Bracket